The Asian Temple set released

Paperschnitzel presents the Asian Temple paper model set available on DriveThroughRPG.com

Asian Temple promo
download iconS H O P

Welcome to the Asian Temple, a papermodel set featuring two mega buildings, the Main Hall and the Pagoda Tower as well as a Gate House and Wall elements. With the Pagoda Tower rising up 21.5″ (55cm) and the Main Hall covering more than 12×10″ (30x25cm) including the foundation base, you will be sure to have an impressive set of terrain buildings for your gaming table.

INCLUDES

  • Pagoda Tower (floor 6×6″, height 21.5″)
  • Main Hall (floor size 10×8″, height 8″)
  • Gate House (floor size 6×4″)
  • Wall and wall connector element

temple interior

PRINT, BUILD and GO!

Each Foundation comes in a set of PDF files, which you can print and build as many times as you want.

Simply print on cardstock paper (min. 90lb. or 160gsm recommended) and build as described in the detailed instructions

Supports both US Legal and A4 paper sizes.

INTERIORS

temple exterior temple interior

The buildings may be built as closed, blocking terrain or as open buildings with detachable roof to allow inside gaming.

25-30mm SCALE

Printed at 100% the buildings will fit 28-30mm figures perfectly. Adjusting the print scale you can print at other scales if required.

SOFTWARE REQUIREMENT

You will need the free Adobe Acrobat Reader 7.0 or later in order to use these PDF files.

ACTION GALLERY

See the Asian Temple in action (miniatures and foundations not included).

The Foundations are from the Foundations set.

temple action temple action

temple action temple action

Paper figures by David Okum, other figures by Games Workshop and LEGO.

Get the Asian Temple files here.

The free Foundation files are available here.

And finally the bundle with David Okum’s paper mini set is here.

2 Replies to “The Asian Temple set released”

  1. Yes and no 🙂 This is one of my oldest sets and it does not have the fold flat layers included. But if you apply the methods I have used in the recent models, like the Castle builder and Village builder series, then you can build it fold-flat.

    The only part I would recommend to build glued are the foundations.

Leave a Reply

Your email address will not be published. Required fields are marked *